Amplifier Specifications SC-411-RD-10-14
Elite Force
SC-409-10 14
Commander
SC-550-10 14
Stealth
SC-407-10 14
Enforcer
Input Voltage 9-16VDC (-ground) 11-16VDC (-ground) 9-16VDC (-ground)
Input Current 16AMPS @ 14VDC 8AMPS or 16AMPS @ 14VDC
Standby Current <340ma <300mA <200mA <300mA
Audio Frequency 200Hz-10kHz +/- 3db
Audio Distortion <7% (@ 1kHz single 100W speaker) <3% (@ 1kHz single 100W speaker)
Audio Output 40W (@ 14VDC per 100W speaker)
Radio Input 0.75VRMS Min, 400 ohms nominal
Output Power 210W RMS Max
(@ 15VDC dual 100W speakers)
105W RMS Max (@ 15VDC single 100W speaker)
180W RMS Max (@ 15VDC dual 100W speakers)
Siren Frequency 700Hz-1500Hz 700Hz-1450Hz
Tones/Cycle Rates Horn = 109 CPS, Wail = 15 CPM,
Yelp = 210 CPM, Phaser = 15 CPS,
Two-Tone = 60 CPM
Horn = 109 CPS,
Wail = 13 CPM, Yelp = 190 CPM, Phaser = 15 CPS,
Two-Tone = 60 CPM
Horn = 109 CPS , Wail = 15 CPM,
Yelp = 210 CPM,
Phaser = 15 CPS, Two-Tone = 60 CPM
High Voltage Protection 16-18VDC siren output ceases to protect speaker, resumes when at a normal level
Short Circuit Current 50AMPS Minimum from supply circuit (supply circuit must provide for 1 second until fuse blows)
Operating Temperature -15F to 140F
Siren Controls 6 Position rotary, push button Horn, push button Manual and Timed Override, noise canceling microphone, PA volume control, external radio volume control, auxiliary input for +/- Horn, Manual, HRC2, or Sweep operation, cutout input for +/- latching cutout operation, face programmable option selection 6 Position rotary, push-button Horn, push-button Manual, attached noise canceling microphone, PA volume control, Radio volume adjust, +/- auxiliary input, cutout input for +/- latching cutout operation, DIP switch options (See Light Control Specs) Control: 6 Position rotary, push-button for Horn and Manual, Power/PA volume control Amplifier: Radio volume adjust, +/- auxiliary siren input, cutout input for +/- latching cutout operation, DIP switch options (See Light Control Specs) 3 Position siren rocker, 3 position power rocker, push-button Horn, push-button Manual/Phaser, PA and Radio volume control, +/- auxiliary input, and cutout input for +/- latching cutout operation (See Light Control Specs)
Siren Connections 12 Pin connector: 2 negative, 3 speaker, 2 radio cutout, 2 auxiliary input, 3 enable, and dimming input 12 Pin connector: 2 positive, 2 negative, 2 speaker, 2 radio, cutout, auxiliary input, enable & video trigger Control: Connected to amplifier with coiled cable Amplifier: 10 Pin connector: 2 negative, 2 speaker, 2 radio, 2 outputs, cutout and auxiliary 10 Pin connector: 2 positive, 2 negative, 2 speaker, 2 radio, cutout and auxiliary
Size Control: 6⅛″W x 2⅝″H x 1¼″D
Amplifier: 8¼″W x 8⅝″H x 2⅛″D
6⅛″W x 2¾″H x 8″D Control: 2¾″W x 6″H x 1″D
Amplifier: 7½″W x 2⅛″H x 6¾″D
6⅛″W x 2⅞″H x 5⅞″D
Ratings Met Class A Sound Level, California Title 13, KKK Class A Sound Level California Title 13 Configurable, KKK for Ambulance Class A and SAEJ1849 Sound Level California Title 13 Configurable Class A and SAEJ1849 Sound Level, California Title 13 Configurable, KKK for Ambulance


Light Control Specifications SC-411-RD-10-14
Elite Force
SC-409-10 14
Commander
SC-550-10 14
Stealth
SC-407-10 14
Enforcer
Light Control Voltage 9-16 VDC (- ground) 11-16 VDC (- ground) 9-16 VDC (- ground)
Light Controls 4 Position lever switch with LED indicators, 8 push buttons 4 Position lever switch with LED indicators and an optional auto siren in the last position & 6 membrane push buttons for auxiliary device control 4 Position slide with optional auto siren in the last position & 4 membrane push buttons for auxiliary device control 4 Position lever with LED indicators and an optional auto siren in the last position & 4 illuminated on/off rockers
Current (Lever Switch) 20 AMPS per circuit, 50 AMPS total 20 AMPS per circuit, 60 AMPS total 30 AMPS per circuit, 60 AMPS total
Current (Auxiliary Switches) 10 AMPS per circuit, 30 AMPS total 20 AMPS per circuit, 80 AMPS total 20 AMPS per switch, 80 AMPS total
Light Connections 3 pin connector with exposed fuses, 10 pin connector (9 for light controls and 1 for video output) with exposed fuses, & 2 screw down terminal for positive #6 AWG wires 3 Screw down terminals with exposed fuses, 6 pin connector with exposed fuses, & 2 #10 AWG wires for power 7 Fused pressure terminal outputs & 2 pressure terminals for up to 2 #6 AWG wires for power 8″ Minimum wire leads, lever – (1) #10 AWG input and (3) #14 AWG outputs, rockers – (1) #14 AWG input and (1) #14 AWG output per switch, EXTERNAL FUSING REQUIRED


Amplifier Specifications SA-441-10F
MagForce
SC-411-RS-20 14
Elite Force
SA-430-17F
Patriot
SA-400-10 14
Classic
Input Voltage 11-16VDC (-ground) 9-16VDC (-ground)
Input Current 17AMPS @ 14VDC 8AMPS or 16AMPS @ 14VDC
Standby Current <250mA <340mA <150mA
Audio Frequency 200Hz-10kHz +/- 3db
Audio Distortion <3% (@ 1kHz dual 100W speakers) <7% (@ 1kHz single 100W speaker) <3% (@ 1kHz single 100W speaker)
Audio Output 80W (@ 14VDC dual 100W speakers) 40W (@ 14VDC per 100W speaker)
Radio Input 0.75VRMS Min, 400 ohms nominal
Output Power 210W RMS Max
(@ 15VDC dual 100W speakers)
105W RMS Max (@ 15VDC single 100W speaker)
180W RMS Max (@ 15VDC dual 100W speakers)
Siren Frequency 700Hz-1500Hz
Tones/Cycle Rates Wail = 13 CPM, Yelp = 190 CPM,
Phaser = 15 CPS, Two-Tone = 60 CPM
Horn = 109 CPS, Wail = 15 CPM,
Yelp = 210 CPM, Phaser = 15 CPS,
Two-Tone = 60 CPM
Wail = 13 CPM, Yelp = 190 CPM, Phaser = 15 CPS, Two-Tone = 60 CPM
High Voltage Protection 16-18VDC siren output ceases to protect speaker, resumes when at a normal level
Short Circuit Current 50AMPS Minimum from supply circuit (supply circuit must provide for 1 second until fuse blows)
Operating Temperature -15F to 140F
Siren Controls Control: 6 Position rotary, push-button for Horn and Manual, PA volume control, dual tone toggle, +/- auxiliary input Amplifier: Radio volume adjust, DIP switch options 6 Position rotary, push button Horn, push button Manual and Timed Override, noise canceling microphone, PA volume control, external radio volume control, auxiliary input for +/- Horn, Manual, HRC2, or Sweep operation, cutout input for +/- latching cutout operation, face programmable option selection Control: 6 Position rotary, push-button for Horn and Manual, PA volume control, +/- auxiliary input
Amplifier: Radio volume adjust, cutout input for +/- latching operation, DIP switch options
6 Position rotary, push-button for Manual and Horn, PA volume control, radio volume adjust, +/- auxiliary input, and DIP switch options
Siren Connections Control: 5 Pin connector with #22 AWG leads: positive, negative, control output, backlighting input, and auxiliary input
Amplifier: 10 Pin connector: 2 positive, 2 negative, 3 speaker, 2 radio, and control input
12 Pin connector: 2 negative, 2 speaker, 2 radio cutout, 2 auxiliary input, 3 enable, and dimming input Control: 5 Pin connector with #22 AWG leads: positive, negative, control output, backlighting input, and auxiliary input
Amplifier: 10 Pin connector: 2 positive, 2 negative, 2 speaker, 2 radio, control input and cutout input
9 Pin connector: 2 positive, 2 negative, 2 speaker, 2 radio, and auxiliary input
Size Control: 6¼″W x 2⅞″H x 1″D
Amplifier: 8″W x 2⅛″H x 6¾″D
Control Head: 6⅛″W x 2⅝″H x 1¼″D
Amplifier: 8¼″W x 8⅝H ″ x 2⅛″D
Control: 6¼″W x 2⅞″H x 1″D
Amplifier: 8″W x 2⅛″H x 6¾″D
6⅛″W x 2½″H x 5⅜″D
Ratings Met Class A and SAEJ1849 Sound Level, California Title 13 Configurable & KKK for Ambulance Class A Sound Level, California Title 13, KKK Class A and SAEJ1849 Sound Level, California Title 13 Configurable & KKK for Ambulance


Light Control Specifications SC-411-RS-20 14
Elite Force
Light Control Voltage 9-16 VDC (- ground)
Light Controls 4 Position lever switch with LED indicators, 8 push buttons
Current (Lever Switch) 20 AMPS per circuit, 50 AMPS total
Current (Auxiliary Switches) 10 AMPS per circuit, 30 AMPS total
Light Connections 3 pin connector with exposed fuses, 10 pin connector (9 for light controls and 1 for video output) with exposed fuses, & 2 screw down terminal for positive #6 AWG wires


Amplifier Specifications SA-500-20 14
Cruiser
SA-385-10 14
Alert
SA-365-10 14
Defender
SA-361-20 14
Defender
Input Voltage 9-16VDC (-ground) 10-16VDC (-ground)
Input Current 8AMPS or 16AMPS @ 14VDC 8AMPS @ 14VDC
Standby Current <150mA 0mA (20mA for backlight lamp) N/A
Audio Frequency 200Hz-10kHz +/- 3db N/A
Audio Distortion <3% (@ 1kHz single 100W speaker) N/A
Audio Output 40W (@ 14VDC per 100W speaker) N/A
Radio Input 0.75VRMS Min, 400 ohms nominal N/A
Output Power 105W RMS Max (@ 15VDC single 100W speaker)
180W RMS Max (@ 15VDC dual 100W speakers)
105W RMS Max (@ 15VDC single 100W speaker)
Siren Frequency 700Hz-1500Hz
Tones/Cycle Rates Wail = 13 CPM, Yelp = 190 CPM, Phaser = 15 CPS, Two-Tone = 60 CPM
High Voltage Protection 16-18VDC siren output ceases to protect speaker, resumes when at a normal level
Short Circuit Current 50AMPS Minimum from supply circuit (supply circuit must provide for 1 second until fuse blows)
Operating Temperature -15F to 140F
Siren Controls 4 Position rotary, push-button Horn, push-button Manual/Phaser, +/- auxiliary input, PA and Radio volume control, cutout input for +/- latching cutout operation, and DIP switch options 4 Position rotary, push-button for Manual and Horn, +/- auxiliary input, PA volume control, and DIP switch options 3 Position siren rocker, 2 position momentary rocker for Horn and Manual, +/- auxiliary input, DIP switch options
Siren Connections 10 Pin connector: 2 positive, 2 negative, 2 speaker, 2 radio, cutout, auxiliary 6 Pin connector: positive, negative, 2 speaker, backlight lamp, auxiliary 6 Pin connector: positive, negative, 2 speaker, auxiliary 10 Pin connector: positive, negative, 2 speaker, auxiliary + and auxiliary – inputs, and 4 tone switch inputs
Size 6⅛″W x 2⅛″H x 5⅞″D 4½″W x 115 16″H x 59 16″D 4½″W x 113 16″H x 413 16″D Control: 3¾″W x 1¼″H x 1¾″D
Amplifier: 5½″W x 113 16″H x 411 16″D
Shipping Weight 4½ LBS 4 LBS 3 LBS
Ratings Met Class A and SAEJ1849 Sound Level, California Title 13 Configurable & KKK for Ambulance Class A Sound Level, California Title 13 Configurable


Amplifier Specifications SA-441M-17F
MagForce Mechanical
SA-430M-17F
Patriot Mechanical
SA-400M-17 14
Classic Mechanical
SA-500M-27 14
Cruiser Mechanical
Input Voltage 11-16VDC (-ground) 9-16VDC (-ground)
Input Current 17AMPS @ 14VDC 8AMPS or 16AMPS @ 14VDC
Standby Current <250mA <150mA
Audio Frequency 200Hz-10kHz +/- 3db
Audio Distortion <3% (@ 1kHz dual 100W speakers) <3% (@ 1kHz single 100W speaker)
Audio Output 80W (@ 14VDC dual 100W speakers) 40W (@ 14VDC per 100W speaker)
Radio Input 0.75VRMS Min, 400 ohms nominal
Output Power 210W RMS Max
(@ 15VDC dual 100W speakers)
105W RMS Max (@ 15VDC single 100W speaker)
180W RMS Max (@ 15VDC dual 100W speakers)
Siren Frequency 700Hz-1500Hz
Tones/Cycle Rates Mech = 6 CPM, Wail = 13 CPM, Yelp = 190 CPM, Phaser = 15 CPS, Two-Tone = 60 CPM
High Voltage Protection 16-18VDC siren output ceases to protect speaker, resumes when at a normal level
Short Circuit Current 50AMPS Minimum from supply circuit (supply circuit must provide for 1 second until fuse blows)
Operating Temperature -15F to 140F
Siren Controls Control: 6 Position rotary, push-button for Horn and Manual, PA volume control, dual tone toggle, +/- auxiliary input
Amplifier: Radio volume adjust, DIP switch options
Control: 6 Position rotary, push-button for Horn and Manual, PA volume control, +/- auxiliary input
Amplifier: Radio volume adjust, cutout input for +/- latching operation, DIP switch options
6 Position rotary, push-button for Manual and Horn, PA volume control, radio volume adjust, +/- auxiliary input, and DIP switch options 4 Position rotary, push-button Horn, push-button Manual/Phaser, +/- auxiliary input, PA and Radio volume control, cutout input for +/- latching cutout operation, and DIP switch options
Siren Connections Control: 5 Pin connector with #22 AWG leads: positive, negative, control output, backlighting input, and auxiliary input
Amplifier: 10 Pin connector: 2 positive, 2 negative, 3 speaker, 2 radio, and control input
Control: 5 Pin connector with #22 AWG leads: positive, negative, control output, backlighting input, and auxiliary input
Amplifier: 10 Pin connector: 2 positive, 2 negative, 2 speaker, 2 radio, control input and cutout input
9 Pin connector: 2 positive, 2 negative, 2 speaker, 2 radio, cutout, auxiliary 10 Pin connector: 2 positive, 2 negative, 2 speaker, 2 radio, cutout, auxiliary
Size Control: 6¼”W x 2⅞”H x 1”D
Amplifier: 8”W x 2⅛”H x 6¾”D
Control: 6¼”W x 2⅞”H x 1”D
Amplifier: 8”W x 2⅛”H x 6¾”D
6⅛”W x 2½”H x 5⅜”D 6⅛”W x 2⅛”H x 5⅞”D
Shipping Weight 6 LBS 5½ LBS 4½ LBS
Ratings Met Class A and SAEJ1849 Sound Level & KKK for Ambulance


Amplifier Specifications SC-1012-10 14
Volunteer
SC-1022-10 14
Volunteer
SB-008-25 14
Phantom
Input Voltage 10-16VDC (-ground) N/A
Input Current 8AMPS @ 14VDC N/A
Standby Current <100mA N/A
Audio Frequency N/A
Audio Distortion N/A
Audio Output N/A
Radio Input N/A
Output Power 105W RMS Max (@ 15VDC single 100W speaker) N/A
Siren Frequency 700Hz-1500Hz N/A
Tones/Cycle Rates Mech = 6 CPM, Wail = 13 CPM, Yelp = 190 CPM, Phaser = 15 CPS, Two-Tone = 60 CPM N/A
High Voltage Protection 16-18VDC siren output ceases to protect speaker, resumes when at a normal level N/A
Short Circuit Current 50AMPS Minimum from supply circuit (supply circuit must provide for 1 second until fuse blows) N/A
Operating Temperature -15F to 140F
Siren Controls 3 Position siren rockers, 2 position momentary rocker for Horn and Phaser, +/- auxiliary input, DIP switch options 6 Membrane push-buttons, +/- auxiliary input, DIP switch options N/A
Siren Connections Screw-down positive and negative terminals; 6 Pin connector: 2 speaker, enable, auxiliary, 2 light outputs, 10 Pin connector for remote panel Screw-down positive and negative terminals; 6 Pin connector: 2 speaker, enable, auxiliary, 2 light outputs, hand control connected to amplifier with coiled cable N/A
Size 6″W x 2″H x 6″D 6⅛″W x 1⅜″H x 6½″D
Shipping Weight 3½ LBS 2½ LBS
Ratings Met Class A Sound Level & California Title 13 Configurable N/A


Light Control Specifications SC-1012-10 14
Volunteer
SC-1022-10 14
Volunteer
SB-008-25 14
Phantom
Light Control Voltage 10-16VDC (-ground)
Light Controls 2 Lighted rockers 2 Membrane Push Buttons 8 On/off push buttons with LED indicators, backlighting of legends changes colors when activated, switches are programmable for on/off, grouped with master button, momentary, and 10 second timed momentary starting on switch 8
Current (Lever Switch) N/A
Current (Auxiliary Switches) 20 AMPS per switch, 20 AMPS total 20 AMPS per circuit, 160 AMPS total
Light Connections 2 Light outputs, see 6 pin connector under Siren Connections 2 #10 AWG wires for positive power input, 2 four position connectors for outputs with exposed fuses, positive and negative plug #22 AWG wire for enable and backlighting


Specifications HA-150-10 14
Under Hood Horn Amp
HA-100-10 14
In-Cab Horn Amp
Speaker Load Single 100W 11 ohm
Input Voltage 9-16VDC (-ground)
Input Current 8AMPS @ 14VDC
Output Power 105W RMS Max (@ 15VDC single 100W speaker)
High Voltage Protection N/A 16-18VDC output ceases to protect horn, resumes when at normal level
Short Circuit Current 50AMPS Minimum from supply circuit (supply circuit must supply for 1 second)
Operating Temperature -22F to +200F -15F to 140F
Controls Vehicle horn ring or separate switch (customer supplied)
Connections 4 wire leads: positive with in-line fuse, negative, 2 speaker 4 Pin removable terminal block: positive, negative, 2 speaker
Size 1½″ H x 4⅛″ W x 2⅛″ D 113/16″ H x 4¼″ W x 3⅝″ D
Shipping Weight 1 LB